manualshive.com logo in svg

Nautel XR3, Руководство по установке

Поделиться
Скачать
Nautel XR3 Скачать руководство пользователя страница 9

XR6/XR3 Installation Manual

Issue 3.1  2014-06-04

Page ix

About this manual

This manual provides information about installing an XR6/XR3 transmitter. This manual is intended 
for use by qualified, trained installers.

Technical support

Nautel offers technical support to customers over the Internet and by telephone. Nautel’s customer 
support team will answer your questions and work with you to identify and resolve problems. 

For technical support, call the Customer Support Team at 902-823-3900 or - in U.S.A. and Canada 
only - call toll free at 1-877-6NAUTEL (662-8835). Or find us on the Internet at 

http://

www.nautel.com

. 

For parts and tools information, see 

“Parts and tools” on page 12-1

 of the 

XR6/XR3 Pre-Installation 

Manual

.

For accessories or spares, see 

“Accessories” on page 10-1

 of the 

XR6/XR3 Pre-Installation Manual

.

For standard warranty information, see 

“Pre-installation assistance” on page 11-1

 of the 

XR6/XR3 Pre-Installation Manual

.

For extended warranty information, see 

“Pre-installation assistance” on page 11-1

 of the 

XR6/XR3 Pre-Installation Manual

.

XR6/XR3 transmitter manuals

The XR6/XR3 documentation suite includes the following documents:

XR6/XR3 Pre-installation Manual, XR6/XR3-PREINST. 

The Pre-installation Manual provides 

instructions and reference information needed when planning and preparing for the installation of an 
XR6/XR3 transmitter.

Nautel Site Protection Manual. 

The Site Protection Manual provides detailed information 

about protecting your site from lightning-related hazards.

XR6/XR3 Installation Manual, XR6/XR3-INST. 

The Installation Manual provides instructions 

and reference information needed when installing an XR6/XR3 transmitter.

Содержание XR3





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды