Nautel XR3-PREINST, Руководство по предварительной установке

Страница: 64 / 90

XR6/XR3 Pre-installation Manual Parts and tools
Page 9-2 Issue 3.0 2009-07-15
Documentation
See “XR6/XR3 transmitter manuals” on page ix.
Parts not supplied by Nautel
Some parts and materials required to complete installation are not supplied by Nautel. The parts you
need vary with the installation requirements. The list of parts you normally provide yourself during
installation include:
• A suitable 50
Ω
RF output coaxial cable, terminated by the proper connector, complete with
center male connector at the transmitter end.
• All external control and monitor wiring, including the associated terminating devices, con-
duit and conduit clamps.
• All electrical power cables, including conduit, terminating devices, and conduit clamps.
Parts ordering
You can order replacement parts from your Nautel sales agent, or directly from Nautel through the
Nautel website.
Module replacement program
Nautel offers a module replacement program for customers who require expedited servicing and
replacement of faulty modules. The module replacement program provides immediate replacement
of failed modules with refurbished modules.
• The replacement module is shipped to the customer as soon as the customer reports the
failure. The customer then returns the failed module to Nautel within 30 days using the same
shipping package.