manualshive.com logo in svg

Nautel VX150, Руководство по устранению неисправностей, Страница: 68 / 182

Поделиться
Скачать
Nautel VX150 Скачать руководство пользователя страница 68

VX150 TO VX2 TROUBLESHOOTING MANUAL

RESPONDING TO ALARMS

PAGE 3.1.60

VERSION 2.0  2023-04-20

Power Amplifier PWB Replacement

NOTE

: 

The USB provided with the transmitter contains videos (mp4 format) that support the 

replacement procedures in this section. Go to the USB’s 

HOME

 screen and click 

VIDEOS

. Videos for 

replacing LRUs are listed in the 

Maintenance

 section.

See MD-1or MD-2 and MD-9 in the Mechanical Drawings section of this manual.

NOTE

: 

For VX1.5 /VX2 transmitters, refer to Mechanical Drawing MD-2 to determine the location of PA1 

and PA2.

1.

Turn RF off and disconnect ac power from the transmitter.

2.

If applicable, remove and retain the four screws securing the transmitter in the rack. 

3.

Place the transmitter on a suitable workbench.

4.

Remove and retain the 21 M3 screws securing the top cover. Remove cover. 

5.

Disconnect the two cables connected to the PA (PA Volts from E1 and RF Drive from J1). Discard 
the M3 screw attached to E1. See 

Figure 3.1.35

.

Figure 3.1.35: PA Cable Removal

CAUTION! 

The Power Amplifier PWB is static sensitive and must be handled in a 

static protected manner.

Remove Cables

Содержание VX150























































































































































































Отзывы:

Нет отзывов