manualshive.com logo in svg

Nautel VX150, Руководство по устранению неисправностей, Страница: 13 / 182

Поделиться
Скачать
Nautel VX150 Скачать руководство пользователя страница 13

VX150 TO VX2 TROUBLESHOOTING MANUAL

RESPONDING TO ALARMS

VERSION 2.0  2023-04-20

PAGE 3.1.5

Alarms Screen

If an alarm exists and is currently being recognized by the transmitter system, it is displayed in the

 

Alarms

 screen of the front panel display (see 

Figure 3.1.2

).

Figure 3.1.2: Alarms Screen 

Table 3.1.1 on page 3.1.7

 contains a column for most alarms that can occur, sorted alpha-numerically. 

The 

Trigger, Clear and Troubleshooting 

columns provides a brief description of the alarm, 

troubleshooting tips and a cross-reference to more troubleshooting, if applicable.

1.

Scroll through the

 Alarms

 screen to view the active faults.

2.

Attempt to clear any latched alarms by selecting Alarms Reset from the Main Menu. If the alarm 
persists, it will not clear from the display.

3.

Locate the alarm name in 

Table 3.1.1 on page 3.1.7

 to determine the cause of the alarm and 

perform any recommended procedures in the 

Description and Troubleshooting Action

 

column. 

This may also lead to replacing a suspect PWB, power supply or fan, as detailed in 

PA Resistance 

Checks, on page 3.1.35

.

NOTE

: 

Before undertaking any troubleshooting, record all meter readings and note if any other alarms 

are displayed on the Alarms screen. record all alarms.

NOTE

: 

Table 3.1.1 on page 3.1.7

 contains a column for most alarms that can occur, sorted alpha-

numerically, including both the names displayed on the front panel and, if different, the remote AUI. 
The 

Trigger, Clear and Troubleshooting 

columns provides a description of the alarm, troubleshooting 

tips, and a link to detailed troubleshooting, as applicable.

4.

If troubleshooting and subsequent replacement of a suspect PWB or module causes the alarm to 
disappear from the 

Alarms

 screen, the alarm has been successfully cleared. If the fault condition 

does not clear, contact Nautel.

Содержание VX150























































































































































































Отзывы:

Нет отзывов