Nautel NX50, Руководство по эксплуатации и обслуживанию, Страница: 39 / 166

NX50 Operations and Maintenance Manual Operating the transmitter
Issue 3.3 2016-02-08 Page 2-21
Viewing Transmitter Log
You can view the NX50’s events log using the Log page - see Figure 2.8 . This page shows a
configurable log of all transmitter events. To view the Log page , click the
Log
button in the bottom
banner of the AUI screen.
Figure 2.8: Log page
The main screen displays a chronological listing of events. Depending on the selections made in the
Log Manager
screen (see "Managing the Log", on page 2-22 ), the events displayed may be filtered by
the originating device [Controller, Exciter, Rack or PM (power module)], and the time of occurrence.
A maximum of five batches (10,000 items) are stored on the AUI. Older items are discarded.
Refer to the NX50 Troubleshooting Manual to cross-reference the alarm name to possible causes and
troubleshooting tips.
Selects item at top
of current page
Selects next
lower page
Scrolls up one item
Scrolls down one
item
Selects next
higher page
Selects item at
bottom of
current page
Maximum 100 items per page
Maximum 20 pages per batch (2000 items)
(use filtering to view older batches)