Nautel NX50 Скачать руководство пользователя страница 128

Страница: 128 / 166

NX50 Operations and Maintenance Manual

Operating the transmitter

Page 2-110

Issue 3.3 2016-02-08

Changeover page - changing exciter transfer settings

The

Changeover

page (see

Figure 2.82

), accessed from the

Menu

page, allows control of exciter

auto-changeover.

Figure 2.82: Changeover Page

On this page, set the following exciter information:

•

Active Exciter

- indicates the exciter that is currently active.

•

Main Exciter

- indicates (in green) which exciter is considered to be the primary exciter.

Select

. The default exciter is

if the

Standby Exciter

is set to

NOTE:

Changing

the setting may change the active exciter.

•

Auto Exciter Changeover

indicates (in green) if automatic exciter changeover is enabled.

Select

Yes

if automatic changeover is desired or

if user selected changeover is desired.

NOTE:

you cannot change the setting if the

Standby Exciter

is set to

No.

•

Standby Exciter

- identifies whether or not a standby exciter is available. This is factory set

and only requires adjustment if an exciter is removed or not functional.

Yes

indicates that a

standby operation is available or desired.

indicates that a standby operation is not avail-

able or desired.

Содержание NX50







































































































































































Результаты поиска

Содержание NX50

Отзывы:

Nautel NX50, Руководство по эксплуатации и обслуживанию, Страница: 128 / 166

Результаты поиска

Содержание NX50

Отзывы: