Nautel NX50, Руководство по установке

Страница: 60 / 74

NX50 Installation Manual Parts and tools
Page 10-2 Issue 6.1 2021-07-13
Documentation
See “NX50 transmitter manuals” described in the Pre-installation Manual.
Parts not supplied by Nautel
Some parts and materials required to complete installation are not supplied by Nautel. The
parts you need vary with the installation requirements. The list of parts you normally provide
yourself during installation include:
• A suitable 50

RF output coaxial cable, terminated by the proper connector, com-
plete with center male connector at the transmitter end.
• All external control and monitor wiring, including the associated terminating devices,
conduit and conduit clamps.
• All electrical power cables, including conduit, terminating devices, and conduit clamps.
• A plastic sheet (or suitable equivalent), used to cover the top of the transmitter during
installation to prevent debris and hardware from falling into the transmitter.
Parts ordering
You can order replacement parts from your Nautel sales agent, or directly from Nautel
through the Nautel website.
Module replacement program
Nautel offers a module replacement program for North American customers who require
expedited servicing and replacement of faulty modules. The module replacement program
provides immediate replacement of failed modules with refurbished modules.
• The replacement module is shipped to the customer as soon as the customer reports
the failure. The customer then returns the failed module to Nautel using the same
shipping package.