NX5 OPERATION & MAINTENANCE MANUAL
ROUTINE MAINTENANCE
VERSION 0.1 2015-08-01
PAGE 3.3.3
4.
Enter the following settings:
IP Address: 10.10.10.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.2
5.
In the Internet Protocol (TCP/IP) Properties window, select
OK
.
6.
In the Local Area Connection Properties window, select
OK
.
7.
In the Local Area Connection Status window, select
Close
.
8.
Close the Network Connections window.
Transfer Software Upgrade File to Transmitter
1.
If using a laptop, connect the laptop network interface card to J3A of the control/interface PWB
(A4) on the exciter panel using a CAT5 Ethernet cable. Open Internet Explorer and search for
10.10.10.2. The transmitter login screen should appear.
2.
If using a network computer, open Internet Explorer and search for the IP address recorded in
Step 2
of
“Transmitter IP Configuration” on page 3.3.2
. The transmitter login screen should appear.
3.
At the transmitter login screen enter:
User: “Nautel” or “****”, where **** is the user assigned user name
Password: leave blank (default) or “****”, where **** is the user assigned password
4.
Navigate through the remote AUI to
Menu ->
System Settings ->
Upgrade Software
, select the
Manage Files
button and press
Browse
. Locate the software update
*.tgz
file stored on the
laptop or network computer, and press
Upload
to load the file into the transmitter upload file list.
Allow this operation to complete.