Nautel NX15, Руководство по эксплуатации и обслуживанию

Страница: 88 / 178

NX15/NX25 Operations and Maintenance Manual Operating the transmitter
Page 2-64 Issue 6.0 2019-01-31
Preset Scheduler
If the scheduler is enabled (see “Enabling the Scheduler” on page 2-69 ), you can program a
yearly preset schedule for the transmitter. Use the
Scheduler
page (see Figure 2.48 ) to set the
dates and times at which presets take effect. You can define up to 63 scheduler rules. To view
the
Scheduler
page, select
Scheduler
from the
Menu
page options.
NOTE
:
The remote AUI’s Scheduler button will not display when the
System Settings ->
Exciter Clock Calibration -> Sync Source
is set to
Combiner
. Use the associated combiner
cabinet’s AUI Scheduler button to configure the system schedule.
Figure 2.48: Scheduler page
WARNING:
When the scheduler is active it can override external power control commands if a
scheduled event at higher power occurs. In the case of tower or antenna work requiring
reduced power, it is best to completely disable the scheduler before proceeding.