Nautel NV7.5, Руководство по эксплуатации и обслуживанию

Страница: 50 / 183

NV10/NV7.5 Operations and Maintenance Manual Operating the transmitter
Page 2-18 Issue 3.4 2016-08-03
Figure 2.8: Log page
Viewing event logs
The
Logs
page displays a “read only” chronological table of log events under the following
column headings (see Figure 2.8 ):
•
Device
- identifies the origin device of the alarm (e.g., Controller, Exciter, or RF Mod-
ule).
•
Event
-
identifies the alarm name.
•
State
- indicates whether the alarm state is active (red bell) or cleared (green check-
mark) and in some cases, indicates whether the RF was turned on or off. This column
will also display which control state (Local or Remote) the transmitter is in, which
preset index was selected, the frequency that is set and the power level.
•
Severity
- indicates how seriously the alarm affects transmitter operation.
Page number of
displayed page
Navigate through
the table using
these arrows
first page
last page
page-by-page
row-by-row
page-by-page
row-by-row