manualshive.com logo in svg

Nautel NV30LT-N, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Nautel NV30LT-N Скачать руководство пользователя страница 94

NV30LT-N OPERATIONS & MAINTENANCE MANUAL

OPERATING THE TRANSMITTER

PAGE 3.2.76

VERSION 0.1  2015-03-01

Figure 3.2.59: RDS Settings editing screens (2 of 3)

Use the up and down arrows to select a hex value between
0x0000 and 0xFFFF, then press the accept (checkmark) button
to save the change. Press the cancel (

X

) button to discard

changes and return to the previous menu. The default hex 
value is 0x0000.

Use the up and down arrows to select the program type from
the various options, then press the accept (checkmark) button
to save the change. Press the cancel (

X

) button to discard

changes and return to the previous menu. The default selec-
tion is NONE.

Use the up and down arrows to select None, TA/TP, TP or TA,
then press the accept (checkmark) button to save the change.
Press the cancel (

X

) button to discard changes and return to

the previous menu. The default selection is NONE.

Use the up and down arrows to select Word or Character,
then press the accept (checkmark) button to save the change.
Press the cancel (

X

) button to discard changes and return to

the previous menu. The default selection is Word.

Enter a name. Use the right and left arrows to move the cur-
sor to the desired character. Use the up and down arrows to
edit the character, then press the accept (checkmark) button
to save the change. Press the cancel (

X

) button to discard

changes and return to the previous menu.

Use the up and down arrows to select Off, Fast or Slow, then
press the accept (checkmark) button to save the change. Press
the cancel (

X

) button to discard changes and return to the 

previous menu. The default selection is Off.

Enter a name. Use the right and left arrows to move the cursor
to the desired character. Use the up and down arrows to edit
the character, then press the accept (checkmark) button to
save the change. Press the cancel (

X

) button to discard chang-

es and return to the previous menu.

Содержание NV30LT-N



































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды