manualshive.com logo in svg

Nautel NV30LT-N, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Nautel NV30LT-N Скачать руководство пользователя страница 214

NV30LT-N OPERATIONS & MAINTENANCE MANUAL

ROUTINE MAINTENANCE

PAGE 3.3.10

VERSION 0.1  2015-03-01

Inspecting Lightning Protection Systems

You should inspect the lightning protection systems that are connected to your NV30LT-N transmitter, 
ac power, RF feedline, antenna and tower periodically to ensure that your site, equipment and 
personnel are fully protected. 

Interval

Every 6 months. 

Parts and Tools

Depends on your site, but may include a digital multimeter, ladder, binoculars, and continuity tester. 

Procedure

Perform the following steps to test the lightning protection systems: 

1.

Test the continuity between ground available at your lightning arrestor and ground available on 
various pieces of equipment connected to the transmitter. Ensure that there is no resistance (near 0 
ohms, accounting for multimeter test lead resistance). 

2.

Physically inspect the lightning arrestor to ensure that all connections are tight. Also look for any 
sign of scoring or burning (indications of possible damage from earlier lightning strikes). 

3.

Using binoculars, visually inspect the hardware on the tower. Look for charred, broken or frayed 
connections and corrosion.

Содержание NV30LT-N



































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды