Nautel GV5, Руководство по эксплуатации и техническому обслуживанию, Страница: 183 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.166 VERSION 0.2 2014-07-23
User Settings - Controller UI
You can establish various user settings for the GV5/GV3.5 using the controller’s UI. Several User
Settings were described previously in this section (e.g., Edit Presets, Set Clock, Network Settings, etc. ).
The following additional options are available:
 Edit Presets: see Managing Presets - using the Controller UI, on page 3.2.74
 Set Clock: see Setting the Clock - Using the Controller UI, on page 3.2.158
 Network Settings: see Network Setup - Using the Controller UI, on page 3.2.140
 Setting Pilot Sample Level - see page 3.2.167
 Configure Test Signal Generator - see page 3.2.168
 Ext. 10 MHz Input: see External 10 MHz Input - using the Controller UI, on page 3.2.154
 Scheduler: see Enabling the Scheduler - Controller UI, on page 3.2.189
 Selecting FM Mask - see page 3.2.170
 Audio Low: see Setting User Thresholds - using the Controller UI, on page 3.2.163
 Turn-On Delay Setting - see page 3.2.171
 Ramp-Up Speed Setting - see page 3.2.172