natus Xltek EMU40EX, Руководство пользователя, Страница: 7 / 14

User Manual Xltek EMU40EX Battery Pack
7
INTENDED USE
The EMU40EX Battery Pack is intended for use with EMU40EX Breakout Box only, which is used in
combination with NeuroWorks
®
/SleepWorks™ software to allow a qualified medical practitioner trained in
electroencephalography or polysomnography to acquire, display, archive, review, and analyze
physiological signals. It can be used with patients of all ages, but it is not designed for fetal use.
INTENDED USERS AND PATIENT TARGET GROUP
The intended users of the EMU40EX battery pack are trained medical professionals or someone
instructed by a trained medical professional. At minimum, it is expected that the user has a basic
understanding of clinical EEG and PSG, conducting an EEG or PSG study, proficiency with computers
and modern operating conventions. The user is typically trained on the use of the
NeuroWorks/SleepWorks software to operate the system or conduct a study acquisition using the
EMU40EX amplifier.
CLINICAL BENEFITS
The EMU40EX batter pack extends the period that a patient may be in an ambulatory position or not
physically connected to an amplifier base through a cable to facilitate the continuous recording of a
patient’s physiological parameters.
CONTRAINDICATIONS AND SIDE EFFECTS
There are no known contraindications or side effects for procedures performed with the EMU40EX battery
pack.
CHARGING THE BATTERY PACK
•
Connect the Battery Pack (Fig.1) to USB Power Adapter (Fig.2) or to a computer USB port using USB
Power Cable (Fig.3).
•
Check that “Charging”
yellow light is on. If yellow light is off, it means, that charger does not detect
sufficient power and will not charge properly. Check cable connections and try again.
•
Leave the Battery connected to the power source until continuous yellow light
(“Charging”) is turned
off and continuous green light
(“Battery”) is turned on.
•
Unplug USB Power Cable (Fig.4) from the Battery Pack. All lights should be off. The Battery Pack is
now ready to use.
NOTE: Complete charging cycle may take about 3½ hours when using USB Power Adapter (Fig.2) and
5~6 hours when using PC USB port. Charging the Battery Pack from USB port is not recommended
due to longer charging time.