EMU40EX™
User and Service Manual
38
Setting the IP Address
1.
To power-up the Base unit, press and hold power button
for 3 seconds. The following user interface appears.
2.
Press the
Settings
button on the touchscreen to access the IP Configuration.
NOTE:
The amplifier supports both DHCP and static TCP/IP address configuration. Selecting DHCP will allow the amplifier to
receive TCP/IP addresses automatically from the DHCP server.
The NeuroWorks software can scan and find available amplifiers for acquisition.
Содержание Xltek EMU40EX
Страница 1: ...EMU40EX User and Service Manual...
