EMU40EX™
User and Service Manual
36
Setting Up
The
EMU40EX
amplifier is designed to work with a computer system running
Natus Database
and
NeuroWorks
EEG software.
Connecting to the computer
USB-Style Connection
To connect the EMU40EX to the computer:
1.
Use the supplied
USB 2.0
cable to connect the
Natus
Base Unit
to the computer.
2.
Insert the
Patient Event Switch
into the Patient Event connection on the Base Unit or Breakout.
3.
If a
Photic Stimulator
is needed, insert the Photic Stimulator into the Photic Stimulator connection on the Base Unit.
4.
When you are ready to run a study, connect the patient leads and transducers to the
EMU40EX
Breakout Box.
USB-Style Hardware Connections for an
EMU40EX
System
Ethernet-Style Connection
1.
Connect the computer to the LAN (Local Area Network).
2.
Connect the
Natus
Base Unit
to the LAN.
3.
Insert the Patient Event Switch into the Patient Event connection on the Base Unit or Breakout.
4.
If a Photic Stimulator is needed, insert the Photic Stimulator cable into the Photic Stimulator connection on the Base
Unit.
5.
When you are ready to run a study, connect the patient leads and transducers to the
EMU40EX
.
Ethernet-Style Hardware Connections for an
EMU40EX
System
NOTE:
Natus has designed the
EMU40EX
amplifier for EEG/LTM studies. For more information on running studies, refer to the
online
Help
.
Connection Setup for the Base Unit
1.
Confirm that the Base Unit is mounted via the Quick Disconnect Bracket to either a system cart or wall mount track.
2.
Connect the amplifier Base Unit to the acquisition computer using a network or via USB. The Base Unit can be
connected to a standard switched gigabit network jack (recommended) or to a secondary gigabit network interface
card on the acquisition computer.
Содержание Xltek EMU40EX
Страница 1: ...EMU40EX User and Service Manual...
