natus UltraPro S100, Руководство пользователя, Страница: 53 / 88

September 13, 2018 3-3
Patient Information
The Patients screen
Patient Information has sections where you enter specific data about the patient,
such as the Patient ID, Gender, Birth Date, and Patient Name as well as physician
information, summary and conclusions.
Entering a new patient
1. Click New Patient to prepare the system for the new patient. If there is any
unsaved data, you will be asked to save or discard it. The patient demographic
area is cleared.
2. Enter the patient demographic data and the visit information.
You must enter the required fields at a minimum. Once the required fields are
entered, the full patient demographics will be available.
The highlighted field indicates the location on the screen where the text will
be entered. Press <
Enter > or < Tab > to advance to the next line in the form.
Press < Shift Tab > to move the blinking cursor to the previous line. The
patient data should be entered before beginning any test procedures.
3. Enter the name, date of birth, etc. as needed.
4. The patient's name, ID, etc. are displayed on the left side of the screen.
5. If desired, to complete the remaining information fields, place the cursor in
the desired field and type the information. Press the Tab key to advance the
cursor to the next field.
6. Click Save to save the patient data to the hard disc.
7. Click Begin Testing to start testing or to enter visit details.
8. Visit information can be added by pressing the Visit Details button.