natus UltraPro S100, Руководство пользователя, Страница: 36 / 88

UltraPro S100
2-8 September 13, 2018
Current stimulator
Safety information
Stimulator
When operating the current stimulator, be careful not to expose
patients to high currents. Before connecting or disconnecting the stimulus
electrode, always “reset” the stimulator.
Simultaneous connection of a patient to HF surgical equipment
may result in burns at the site of the electrical stimulus, or recording electrodes
and possible damage to the electrical stimulator, or the electrode input amplifiers.
Operation in close proximity (e.g., 1m) to short wave, or microwave therapy
equipment may produce instability in the electrical stimulator output.
Dangerous physiological effects! The current stimulator may give
off dangerous currents and voltage.
Avoid electrical stimulation for an extended period of time.
Stimulus electrodes
When using needle electrodes for recording or stimulation, either
use pre-sterilized, single-use needle electrodes, or thoroughly sterilize multiuse
needle electrodes.
Avoid accidental contact between connected, but unapplied
electrodes and other conductive parts; including those connected to protective
earth.
Note: For cleaning reusable surface electrodes, refer to their accompanying
instructions for use.