natus Otometrics ICS Chartr 200 VNG/ENG Скачать руководство пользователя

Страница: 18 / 72

Collect Patient Data

4.1

Step 14

VNG – Center and Focus the Video Image

A. Click the

New Test

tab on the Main Window and choose the eye(s) to be tested.

B. Click

F7 Video Adjust

to display the Video Adjustments dialog.

C. Adjust the eye image.

1. Ask the patient to look straight ahead.

2. Move the goggles to center and level the pupils. Make sure the pupils are inside the boxes, as close to the center

as possible.

3. Tighten the back head strap until the goggles are snug. The goggles should fit securely so they will not move dur-

ing positional testing.

4. Straighten and tighten the top head strap to assist in positioning the goggles on the patient’s face and positioning

the pupils in the box.

Video Adjustments Dialog Box, Both Eyes

5. Use the goggle horizontal

and vertical positioning
knobs to center each pupil
image.

6. Use the goggle focus knobs

to focus each image.

7. Repeat as needed to center

the pupils and focus the eye
images.

Note

•

For monocular testing, only the selected eye will be visible. If testing both eyes, make sure both eye images dis-

play, both pupils are centered, and both eye images are in focus.

D. Use the goggle controls (knobs) if needed to align the patient’s eyes and focus the image while the patient looks

straight ahead.

Otometrics - ICS Chartr 200 VNG/ENG

4 Collect Patient Data

Содержание Otometrics ICS Chartr 200 VNG/ENG









































































Результаты поиска

Содержание Otometrics ICS Chartr 200 VNG/ENG

Отзывы:

Похожие инструкции для Otometrics ICS Chartr 200 VNG/ENG

Бренды по названию

Популярные бренды

natus Otometrics ICS Chartr 200 VNG/ENG, Руководство по установке и запуску

Результаты поиска

Содержание Otometrics ICS Chartr 200 VNG/ENG

Отзывы:

Похожие инструкции для Otometrics ICS Chartr 200 VNG/ENG

Бренды по названию

Популярные бренды