Caution
•
When you connect other electrical equipment to MADSEN Astera², remember that equipment that does not
comply with the same safety standards as MADSEN Astera² can lead to a general reduction in the system's safety
level.
Connection panel - ACP
A. PC/USB connection
•
USB cable
B. Connections from MADSEN Astera²
•
Speaker built into the ACP
•
Operator monitor headset with boom microphone
•
Operator desktop microphone
C. Connections to accessories
•
Operator desktop microphone
•
Operator monitor headset with boom microphone
5
Powering the device
MADSEN Astera² is powered through an external power supply connected directly to the mains outlet.
Switching on MADSEN Astera²
Use only the power supply specified in Technical Specifications in the MADSEN Astera² Reference Manual.
1. Connect the mains plug of the external power supply directly to an AC mains outlet with a three-wire
protective ground.
2. Switch on the mains supply.
3. The On/Off indicator on MADSEN Astera² lights green.
Press the ON/OFF button on the front of MADSEN Astera².
MADSEN Astera²
11
5 Powering the device
