natus ErgoJust ICU Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 92

natus ErgoJust ICU Скачать руководство пользователя страница 3

Information

August 22, 2017

a

Technical support

Natus Medical Incorporated
DBA Excel-Tech Ltd. (XLTEK)
2568 Bristol Circle
Oakville, Ontario, L6H 5S1 Canada
Tel: 905-829-5300 or Fax: 905-829-5304
Toll Free (US & Canada): 800-303-0306
Technical Support Email: [email protected]
Customer Service Email: [email protected]
Website: www.natus.com

Publisher’s notice

Part 019667 Rev 05
Natus ErgoJust and ErgoJust ICU Cart Installation and Functionality Guide

Natus EU Authorized Representative

Natus Manufacturing Limited
IDA Business Park
Gort, Co.Galway, Ireland

Safety and standards conformity

The Natus ErgoJust cart meets the following safety standards set by domestic and international regulatory agencies for Medical
Electrical Equipment.

•

UL 60601-1

General Requirements

•

CSA 22.2 No. 601.1-M90

General Requirements

•

IEC/EN 60601-1

General Requirements

Copyright and trademarks

© 2017 Natus

Medical Incorporated or one of its subsidiaries. All rights reserved.

Natus is a registered trademark of Natus Medical Incorporated. All product names appearing on this document are trademarks or
registered trademarks owned, licensed to, promoted or distributed by Natus Medical Incorporated, its subsidiaries or affiliates. All
other trademarks are the property of their respective owners.

«
1
2
3
4
5
...
»

Содержание ErgoJust ICU





























































































Отзывы:

Нет отзывов