natus Camino ICP, Руководство пользователя

Страница: 35 / 148

35
CHAPTER 3 – Setting up the system for clinical use
Setting Up the System for Clinical Use
The following section contains instructions for positioning the monitor, powering the monitor, and connecting
catheters to the monitor prior to clinical use.
Positioning the Monitor
The Natus Camino ICP Monitor is intended to be positioned on a hard flat surface or securely clamped to an
equipment pole or bed support next to the patient. The distance between the patient and the monitor is
restricted by the length of the Natus catheter cable. It is not permitted to extend the Natus catheter cable with
non-Natus extension cables.
Caution
To prevent the monitor from overheating:
• Do not block the air vents on the rear and bottom of the unit
• Do not place the monitor on a soft or uneven surface, which may result in blockage of the monitor’s air vents. For
example, do not place the monitor on the bed during patient transport.