→
Pressing an empty Cue/Sample Trigger button in this way will set a normal cue point in
your track.
If you want to set a fade-in, fade-out, load, or Grid marker:
►
Set a normal cue point first and then change it in the Deck's Advanced Panel in the soft-
ware (please refer to the TRAKTOR 2 Manual for further information).
The Cue/Sample Trigger buttons light up in colors which correspond to the kind of marker
that they represent. See also
6.2, The Z2 Audio Interface And Control Panel
To delete a cue point:
1.
Set the Deck focus to the Deck containing the track with cue points you wish to delete.
2.
Press and hold
SHIFT
and then press the relevant Cue/Sample Trigger button containing
the cue point you wish to delete. The button light will go out, indicating that it is now
empty.
Activate Snap and Quantize by pressing the
S
and
Q
buttons at the top of the Z2 panel to
get a seamless Hotcue jump.
With TRAKTOR's new Flux mode, you can trigger loops / cue points while preserving the
track's phrasing. See
for further information on Flux mode and how it af-
fects cue points and loops.
You can change the behavior of the Cue/Sample Trigger buttons' secondary functions in
TRAKTOR's preferences. See also
5.4.5, Cue/Sample Trigger Section (1, 2, 3, 4)
.
4.3.3
Working with Loops
Storing loops with the Z2 is as easy as setting cue points. The only difference is that a loop
must be active in order to store it. To store a loop on one of the Cue/Sample Trigger buttons (
1
to
4
):
1.
Set the Deck focus on the Deck containing the track where you want to store a loop (see
also
4.3.1, Changing Deck Focus For The Cue/Sample Trigger Buttons
2.
With the
LOOP
(
SIZE
) encoder, set the length of the loop. The loop length is indicated on
the Loop Size display.
3.
Press the
LOOP
(
SIZE
) encoder to activate the loop.
Using the Z2 with TRAKTOR (TRAKTOR Mode)
Using the Cue/Sample Trigger Buttons
TRAKTOR KONTROL Z2 - Manual - 25
Содержание Traktor Kontrol Z2
Страница 1: ...Manual ...
