Native Instruments Maschine Скачать руководство пользователя страница 193 | Manualshive

Страница: 193 / 730

Native Instruments Maschine Скачать руководство пользователя страница 193

Use the same method to unmute the Plug-in:

►

To activate the bypassed slot again, click its grayed out icon.

In most cases the first Plug-in slot contains an Instrument Plug-in (e.g., a Sampler). Be

careful: bypassing the slot will mute the whole Sound!

5.1.6

Using Side-Chain

Some Plug-ins provide side-chaining. This allows you to control their influence on the audio via
another audio signal sent to their secondary, side-chain input. This extra routing feature is de-
scribed in details in section

10.1.3, Using the Side-Chain Input

.

5.1.7

Moving Plug-ins

MASCHINE allows you to move Plug-ins across the Plug-in List and across Sounds and Groups.

Moving Plug-ins Within the Plug-in List

►

To move a Plug-in in the Plug-in List, click its name and drag your mouse vertically.
While you are holding the mouse button, an insertion line appears at the place in the
Plug-in List where the Plug-in would land if dropped. Drag your mouse until the insertion
line is at the desired location, then release the mouse button to drop the Plug-in onto this
new location.

→

The Plug-in takes its new place between the existing Plug-ins while keeping the exact
same settings. All other Plug-ins sitting between its old and new location are shifted one
slot upwards/downwards to fill the gap.

Dragging Plug-ins can be very useful if you want to quickly change the effects’ process-
ing order in the channel.

Working with Plug-ins

Plug-in Overview

MASCHINE 2 - Manual - 193

«
...
191
192
193
194
195
...
»

Содержание Maschine



























































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов