Native Instruments MASCHINE MK3, Руководство пользователя

Страница: 41 / 891

The zooming and scrolling functions are indicated, when available, by little icons that appear
as overlays above the relevant Knobs as soon as you touch any of them. This way, in case of
doubt, a simple touch on any Knob below the right display will indicate if some zooming and
scrolling functions are available.
When you touch any of the Knobs 5–8, little icons appear above the Knobs used for zooming/scrolling in the display.
2.3.6 Focusing on a Group or a Sound
To display the content and parameters of a particular Sound or Group, you first need to put it
in focus.
Setting the focus on a Sound or Group is slightly different than selecting it: The focus defines
what will be displayed, whereas the selection defines what will be affected by your edits. Note
that a focused Sound/Group is always selected. The distinction is of importance because you
can select multiple Sounds or Groups to apply your edits to all of them at once! See section
↑
4.1.3, Selecting Multiple Sounds or Groups for more on this.
We show here how to put Sounds and Groups in focus when the MASCHINE software is
in Arrange view (default view). For instructions on putting Sounds and Groups in focus
in Mix view, please refer to chapter
↑
9.2.3, Selecting Channel Strips .
Basic Concepts
Common Operations
MASCHINE - Manual - 41