Native Instruments MASCHINE MK3, Руководство пользователя

Страница: 353 / 891

Quick Edit Shortcuts for the Selected Steps
You can also quickly adjust the velocity, pitch, and position of any events via the Quick Edit
shortcuts:
1.
Press and hold the pad(s) of the step(s) you want to edit.
2. To adjust the events’ velocity, press the VOLUME ( Velocity ) button and turn the 4-D en-
coder.
The adjusted value appears on the left display.
3. To finely adjust the events’ position, SWING ( Position ) button and turn the 4-D encoder.
The adjusted value appears on the left display.
4. To adjust the events’ pitch, press TEMPO ( Tune ) button and turn the 4-D encoder.
The adjusted value appears on the left display.
5. When you are done, release the pad(s).
The event position will be adjusted independently of the current Step Grid: It is de-
signed as a fine adjustment within the current step.
7.3.3 Recording Modulation in Step Mode
You can also record modulation in Step mode. This is helpful when you want to set value
changes at a specific time in a Pattern.
For all details on modulation please refer to section
↑
7.5, Recording and Editing Modu-
lation .
1. Press and hold the pad(s) representing the step(s) you want to modulate (you may need to
use Knob 6 to navigate beforehand to the desired part of the Pattern).
The displays will switch to a mode similar to Control mode displaying parameter values.
2. Like in Control mode, use Button 2 or 3 to select the Group or Sound level, respectively;
press
PLUG-IN or CHANNEL to display the Plug-ins or Channel properties at this level;
use Button 5 and 6 to select the desired Plug-in slot or set of Channel properties; and use
Working with Patterns
Recording Patterns with the Step Sequencer
MASCHINE - Manual - 353