Native Instruments Maschine Mikro MK2 Скачать руководство пользователя страница 53

Страница: 53 / 181

Click and hold the Sound slot

, which now contains the “Snare Ektl A 1.”

While holding the mouse button, drag your mouse down. When the insertion line appears

above the other snare, release the mouse button.

→

Your first snare takes place above the second snare in the Sound slot

. It will now be

triggered by pad

on your controller.

Keep in mind that any change in the Sound slot positions also affects the pads triggering the corre-

sponding Sounds! Hence, it is recommended you practice with your new mapping to avoid confu-
sion.

3.3

Saving Your Project

Again, it is recommended to regularly save your work. You can then open another Project or
close MASCHINE and take a break. Your tutorial Project will be recalled as it was the next time
you open it.
To save your Project in the software:

►

Press [Ctrl] + [S] ([command] + [S] on macOS) to save your Project.

To save your Project on the controller:

►

Press

SHIFT

SAMPLING

to save your Project.

3.4

To Sum Up…

In this tutorial, you have learned to:

▪

Open a Project using the Browser (both on your controller and in the software).

▪

Replace one of the Sounds from the original Group with another Sample taken from the
factory library using the Browser.

▪

Replace one of the Sounds from the original Group with a Drumsynth.

▪

Adjust the overall volume of MASCHINE along with the individual volume levels of your
Groups and Sounds using your controller.

Building Your Own Drum Kit

Saving Your Project

MASCHINE MIKRO - Getting Started - 53

Содержание Maschine Mikro MK2






















































































































































































Результаты поиска

Содержание Maschine Mikro MK2

Отзывы:

Native Instruments Maschine Mikro MK2, Начало работы, Страница: 53 / 181

Результаты поиска

Содержание Maschine Mikro MK2

Отзывы: