8.4.5
Assignments for Knobs
For the Knobs, the
Type
menu offers the entries
Control Change
and
Program Change
. Depend-
ing on the selected entry, the further available options differ subsequently. The following table
details the different combinations of options:
Type Menu Value
Mode Menu
Range
Number
Step
Control Change
Absolute
From 0-126 / To
1-127
Number
(0-127)
Relative
Step (-32 to
31)
Relative (Offset)
Step (-32 to
31)
Program Change
From 0-126 / To
1-127
Mode Menu Values for Knobs
For the type Control Change, a
Mode
menu allows you to select between three operating
modes:
▪
Absolute: In this mode the control element sends absolute values. The
Range From
,
To
, and
Resolution
parameters are the same as for the other message types (see above).
▪
Relative: In this mode the sent message is in a +1/-1 fashion — actually 1/127, which is
then understood by the target software as +1/-1 in that case. This allows the control ele-
ment to set the new Control Change value relatively to its current value. Two parameters
are available:
◦
Step
: Defines the increment to use. Increase the
Step
value to trigger greater jumps in
the target parameter value. If you choose a negative value for
Step
, the control will be
inverted.
MIDI Communication
Using the MIDI Assignment Editor
KOMPLETE KONTROL - Manual - 93
Содержание KOMPLETE KONTROL S49
Страница 1: ...MANUAL ...
