Native Instruments komplete kontrol s series, Руководство пользователя

Страница: 321 / 338

►
Click the Color menu and select the desired color from the color picker that opens:
→
The selected color is applied to the Key Zone, as shown at the bottom of the Hardware
area. On your keyboard, the Light Guide mirrors this color above the keys in that Key
Zone.
To actually see the selected color in the Light Guide on your keyboard, you might need
to shift the keybed to keys within that Key Zone by pressing the OCT-/OCT+ buttons.
For more information on Key Zones, please refer to section
↑
23.3, Defining Key Zones .
25.6.4 Assignments for the Pads – Hit Action
The assignments described here are valid for the pads of the whole MASCHINE controller fami-
ly (MASCHINE, MASCHINE MK2, MASCHINE MIKRO, MASCHINE MIKRO MK2, MA-
SCHINE STUDIO). The Hit action on a pad is very similar to actuating a button (see
↑
25.6.2,
Assignments for Buttons above).
The only differences between hitting a pad and pressing a button are the following:
▪
The Pitchbend entry is not available in the Type menu.
However, you can control the Pitchbend via the Press action of the same pad. This al-
lows you to create a very intuitive tuning control: With the Hit action of the pad trigger-
ing a MIDI Note, you can then detune this note by varying the pressure that you’re ap-
plying to the pad!
▪
There is no Action on menu.
Reference
MIDI Message Parameters
CONTROLLER EDITOR - Manual - 321