Native Instruments BATTERY 4, Руководство пользователя

Страница: 42 / 84

•
Cutoff : Adjusts the cutoff frequency.
•
Reso : Adjusts the resonance amount of the filter. Turning the control to the right makes the
frequency content at the cutoff frequency more pronounced.
•
Gain : Adjusts the output level of the filter. Setting Gain to high values can be used to apply a
soft saturation effect. This control is not available when selecting the AR filter types.
11.5.6. Peak/Notch
Peak/Notch mode is a resonant filter that can create either peaks or notches in the frequency
spectrum. It offers four different filter types that change the character of the filter.
You can select the filter type using the Type selector:
•
Ldr Peak : Ladder peak filter that boosts frequency content at the cutoff frequency. The amount
of boost can be set using Reso .
•
Ldr Notch : Ladder notch filter that attenuates frequency content in two narrow bands above
and below the cutoff frequency.
•
SV Notch : 4-pole state-variable notch filter that attenuates or boosts frequency content at the
cutoff frequency. The amount of attenuation or boost can be set using Reso .
•
SV BR : State-variable band reject filter that attenuates frequency content in a narrow band
slightly below cutoff frequency.
The following controls are available in this mode:
The following controls are available per filter:
Cutoff (adjusts the frequency below which signals
will be attenuated); Reso (with a value greater than 0, this control will boost a small frequency
range around the cutoff frequency); and Gain (controls the amplitude increase after the filter,
which can be used to compensate for amplitude reduction due to the filter, or to increase the soft
saturation of the effect — this one is only available for Ldr Peak and Ldr Notch ).
•
Cutoff : Adjusts the cutoff frequency.
•
Reso : Adjusts the resonance amount of the filter. Turning the control to the right makes the
frequency content at the cutoff frequency more pronounced.
•
Gain : Adjusts the output level of the filter. Setting Gain to high values can be used to apply a
soft saturation effect. This control is not available when selecting the Ldr filter types.
11.5.7. Effect
Effect mode is a collection of special filters that transform the frequency spectrum in specific
ways. It offers four different filter types that change the character of the filter.
You can select the filter type using the Type selector:
•
Frm 1 : Variation 1 of a formant filter that produces resonances typical to those of the human
voice.
•
Frm 2 : Variation 2 of a formant filter that produces resonances typical to those of the human
voice.
•
Vow A : Variation A of a special filter that mimics the way vowel sounds are produced by the
human mouth, similar to classic talk box effects.
•
Vow B : Variation B of a special filter that mimics the way vowel sounds are produced by the
human mouth, similar to classic talk box effects.
EFFECTS PAGE 38