Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call National Customer Service
800.482.1717
.
Assembly Instruction
Telephone 800.482.1717
Fax 812.482.8800
www.NationalOfficeFurniture.com
3206401
Rev,
-
TESSERA HGT. ADJ.
DESK
Tools Required
-
Screw Driver w/ #2 Phillips Bit
-
Level
-
Cable ties
Hardware
-
Glides
x8
Figure A
1
Unpack the desk and set into position.
Figure B
Figure C
3
Install glides (Qty. 4 per shroud) supplied in hardware kit to underside of each
shroud (Figure C)
2
Remove two flat brackets from the bottom of each shroud to access the interior as
needed. Brackets can be discarded (Figure B) as they are only installed to protect
during shipping.
NOTE: Removable panel hangs from Z
-
clip brackets. Once flat brackets are
removed care should be taken so that the panel does not disengage from Z
-
clip
and damage the component.
