Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call National Customer Service
800.482.1717
.
Weli Assembly Instruc on
Recommend Tools
•
5/32” Hex Key or
drive
Package Contents Qty.
•
1/4
-
20 X 3/4” flat
6
head socket cap screw
•
1/4
-
20 X 5/8” button
4
head socket cap screw
Telephone 800.482.1717
Fax 812.482.8800
www.NationalOfficeFurniture.com
Part #
3045797
Rev,
-
Printed in U.S.A
© 2013 Kimball International, Inc.
Product Line
NOF HC Guest Seating
1
Move the add
-
on unit into position so that the holes in the
seat rails are aligned with the slots in the mounting rails.
Assemble the rails using the (4) 1/4
-
20 X 5/8” button head
screws into the threaded holes. Ensure that the underside of
the screws is flush and tight to the face of the mounting
rails.
Figure B
2
Figure C
Figure A
With the starter unit secure, an add
-
on or end unit (shown)
should be located so that the seat rails will slide into the
mating rail on the outside of the chair.
Note: seat panels and foam have been removed for clarity.
