Ramp and Platform Bracket Quick Installation Guide
Thank you for purchasing from National Ramp! This quick installation guide will cover how to install the new
Ramp and Platform Bracket. The Ramp and Platform Brackets are used as an added security to prevent ramps
and platforms from disconnecting.
It does not take the place of leg supports.
The Ramp and Platform Bracket can be used on Liberty and Breeze systems to secure:
1.
Ramps onto Platforms (inside and outside corner)
2.
Platforms onto Ramps
3.
Ramps onto Ramps
4.
Platforms onto Platforms
Tools Required:
Impact Driver
Phillips Head #2 bit
Instructions:
Please note the following when installing the Ramp and Platform Brackets:
Orientation of the tongue and groove with respect to the orientation of the bracket.
Which holes to use when screwing in bracket.
Improper bracket orientation and/or screw install will result in an ineffective install.
