INCLUDED HARDWARE
TOOLS FOR ASSEMBLY
Drill
Allen Wrench
36x Screws
4x Bolt
Congratulations
, your table is now assembled and ready to be used!
ASSEMBLY INSTRUCTIONS
COLLABORATOR TABLE WITH CROSSBEAM
TABLE COMPONENTS
1
Fasten each end of the
crossbeam to each leg by
installing 2 included bolts
through the holes at the
center each leg and into the
ends of the crossbeam.
Dear Customer
,
Thank you for your purchase. Although extreme care goes into manufacturing &
packaging of this product, mistakes are possible. If you encounter any missing parts or difficulty in
assembly, please contact our customer service Toll Free at
1-800-261-4112
or
for courteous & immediate resolution to your problem.
2
Align the leg top plates with
the pre-marked holes on the
tabletop and fasten legs to
tabletop by installing 9
screws through each top
plate into the tabletop.
Crossbeam
Tabletop
2x Legs