National Meter & Automation T200, Руководство пользователя

Страница: 1 / 24

WATER METER MATERIAL & ORDER INFORMATION
Supplier Contact:
National Meter & Automation, Inc.
PO Box 8339
2250 Apollo Way #300
Santa Rosa, CA 95407
Kathy Richards
Phone 707/575 ‐ 0700
Fax 707/575 ‐ 3786
Toll Free 877/348 ‐ 0700
www.nmaai.com
Material (Commercial):
1. METER BOX
Commercial: Oldcastle Christy N36 Concrete Meter Box
2. BADGER METER
Residential: Recordall Compound Series Meters
Size: 2”, 3”, 4”, 6”
3. ENCODER
HR ‐ E High Resolution 8 ‐ Dial Encoder, registered in cubic foot
Note: Two (2) encoders will be required for Compound Meters (a high side & a low side).
Please see table below for model numbers.
Compound Meter Size High Side Model #
(Placed on Short side of meter)
Low Side Model #
(Placed on Taller side of meter)
2” T200 M25 (or also labeled Low 2,3)
3” M450 M25 (or also labeled Low 2,3)
4” M1000 M35 (or also labeled Low 4,6)
6” M2000 M35 (or also labeled Low 4,6)
4. TRANSPONDER/ENDPOINT
ORION Cellular Endpoint with Nicor Connector
Note: Two (2) endpoints will be required for Compound meters (hi/low).
5. & 6. MOUNTING KITS & LIDS (Two mounting kits, one for each endpoint)

For Meter boxes installed in grass & landscaping or non ‐ traffic areas
o
Through ‐ the ‐ Lid Install Kits (64394 ‐ 024)
o
Concrete Lid: Oldcastle N36RP Concrete Lid marked "Water" w/ probe holes

For Meter boxes that will need a drive ‐ over lid in traffic areas, i.e. alleys & driveways
o
Below ‐ the ‐ Lid with Knuckles Install Kits (64394 ‐ 003)
o
Fiberlyte Lid (FL 36D marked “Water”)