National Instruments Window, Руководство пользователя

Страница: 12 / 39

LabWindows/CVI Release Notes for Windows 12 © National Instruments Corporation
execution only if it was the active window at the time execution was suspended. If a
LabWindows/CVI window, such as a Source window, was active at the time execution was
suspended, LabWindows/CVI does not reactivate a window.
For instance, if you suspend execution by selecting the Break Execution option from the
Run menu in a Source window, LabWindows/CVI does not reactivate a window when you
resume execution.
New Print Dialog Box
For more information on printing graphics and text on Windows using the reorganized Print
dialog box, refer to the
Revised Print Dialog Boxes on Windows section in the Changes to the
User Interface Library section later in this document.
New Options for Source File Printing
New options for printing source files include adding the date, time, and filename at the top of
each page, adding page numbering, and choosing various text style options. The text style
options apply to Windows platforms only. The new options on the dialog box correspond to
the new text printing attributes in the User Interface Library. Refer to the
Application of
Attributes to Text Printing and New Print Attributes sections in the Changes to the User
Interface Library section later in this document.
Edit Menu
The Find and Replace commands of the Edit menu of the Function Tree Editor window and
the Function Panel Editor window open dialog boxes similar to the Find and Replace dialog
boxes in the Source window, which allow you to search and replace text in the entire function
panel (
.fp
).
Code Menu
In certain cases, the Select Attribute Constant command in the Code menu replaces the
Select UIR Constant command. This occurs in panels for functions that set or get attribute
values. The User Interface Library, the VISA Library, and IVI drivers include such functions,
for example,
GetCtrlAttribute
,
SetCtrlAttribute
,
GetPanelAttribute
, and
SetPanelAttribute
in the User Interface Library. The panels for these functions each
contain an Attribute ring control and a corresponding Value input control. When you use
either of these two controls, the Select Attribute Constant command appears in the Code
menu. The action of the command differs based on whether you use the Attribute or
Value control.
New Tools Menu
This section describes the commands in the Tools menu of the Project, Source, Function
Panel, Function Tree Editor, and Function Panel Editor windows.