© National Instruments Corporation
Index - 1
VXIpc-850 Series User Manual
Index
A
ACCESS LED, 1-5, C-3
audio capability. See speaker.
B
base address configuration, GPIB, 5-10
BIOS. See also CMOS.
clearing CMOS contents, 3-10
disabling memory checks, F-4
setting up. See WinBIOS.
viewing settings, F-3
board access LEDs, C-3
bulletin board support, G-1
C
CLK10 signal, VXIbus
accuracy, F-1
definition, F-1
routing, 3-5 to 3-7
selecting signal source (figure), 3-6
SMB CLK10 direction (figure), 3-6
SMB CLK10 polarity (figure), 3-7
SMB CLK10 termination
(figure), 3-7
CMOS. See also BIOS.
PC configuration, 3-10 to 3-11
setting back to default, F-4
COM1 and COM2 connectors and
signals, D-6
common questions about VXIpc-850,
F-1 to F-4
configuration. See also WinBIOS.
default settings, 3-1 to 3-3
factory default settings (table), 3-3
parts locator diagram, 3-2
EEPROM, 3-8 to 3-9
fixing invalid configuration, 3-9
power-on self configuration status
(figure), 3-8
protecting against electrical hazards
(warning), 3-9
SMB trigger input termination
(figure), 3-8
electrostatic discharge (warning), 3-1
installed system RAM, 3-9
installing VXIpc-850, 3-12 to 3-13
PC configuration, 3-9 to 3-11
Ethernet power-on defaults, 3-11
GPIB interrupt level, 3-10
parallel port DMA level, 3-11
SCSI termination, 3-10
system CMOS, 3-10 to 3-11
removing metal enclosure, 3-4
trigger input termination, 3-7
VXIbus CLK10 routing, 3-5 to 3-7
VXIbus Slot 0/non-Slot 0, 3-4 to 3-5
connectors
COM1 and COM2, D-6
Ethernet, D-5
external SMBs, D-11 to D-12
GPIB (IEEE-488.2), D-10 to D-11
keyboard and mouse, D-2 to D-3
parallel port, D-7 to D-8
SCSI, D-8 to D-10
signal characteristics, D-15
speaker, D-14
