National Instruments USB-9481 страница 14 Скачать руководство пользователя

Страница: 14 / 16

NI USB-9481 User Guide and Specifications

ni.com

Note

For UL and other safety certifications, refer to the product label or visit

ni.com/certification

, search by model number or product line, and click the

appropriate link in the Certification column.

Hazardous Locations

The NI USB-9481 is not certified for use in hazardous locations.

Environmental

The NI USB-9481 device is intended for indoor use only.

Operating temperature ............................0 to 60 °C

Storage temperature ................................–40 to 85 °C

Humidity .................................................10 to 90% RH, noncondensing

Maximum altitude...................................2,000 m

Pollution Degree (IEC 60664) ................2

Electromagnetic Compatibility

This product is designed to meet the requirements of the following
standards of EMC for electrical equipment for measurement, control,
and laboratory use:

•

EN 61326 EMC requirements; Minimum Immunity

•

EN 55011 Emissions; Group 1, Class A

•

CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A

Note

For EMC compliance, operate this device with double-shielded cables.

CE Compliance

This product meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:

•

2006/95/EC; Low-Voltage Directive (safety)

•

2004/108/EC; Electromagnetic Compatibility Directive (EMC)

Note

Refer to the Declaration of Conformity (DoC) for this product for any additional

regulatory compliance information. To obtain the DoC for this product, visit

ni.com/certification

, search by module number or product line, and click the

appropriate link in the Certification column.

Содержание USB-9481

















Результаты поиска

Содержание USB-9481

Отзывы:

Похожие инструкции для USB-9481

Бренды по названию

Популярные бренды

National Instruments USB-9481, Руководство пользователя и технические характеристики

Результаты поиска

Содержание USB-9481

Отзывы:

Похожие инструкции для USB-9481

Бренды по названию

Популярные бренды