National Instruments Two-Slot Embedded Controller NI PXI-8183 Скачать руководство пользователя

Страница: 53 / 69

Appendix A

Specifications

NI PXI-8183 User Manual

A-2

ni.com

Operating Environment

Ambient temperature range

...................5 °C to 50 °C

(Tested in accordance with
IEC-60068-2-1 and
IEC-60068-2-2.)

Relative humidity range..........................10% to 90%, noncondensing

(Tested in accordance with
IEC-60068-2-56.)

Altitude ...................................................2,000 m (at 25 °C ambient

temperature)

Pollution Degree .....................................2

For indoor use only.

Caution

Clean the PXI-8183 with a soft nonmetallic brush. Make sure that the device is

completely dry and free from contaminants before returning it to service.

Storage Environment

Ambient temperature range ....................–40 to 65 °C

(Tested in accordance with
IEC-60068-2-1 and
IEC-60068-2-2.)

Relative humidity range..........................5% to 95% noncondensing

(Tested in accordance with
IEC-60068-2-56.)

Shock and Vibration

Operational shock ...................................30 g peak, half-sine, 11 ms pulse

(Tested in accordance with
IEC-60068-2-27. Test profile
developed in accordance with
MIL-PRF-28800F.)

For chassis not available in the online catalog at

ni.com

, please contact National Instruments for supported operating

temperatures.

5 to 50°C for NI PXI-1036 Revision D and later, and NI PXI-1036DC Revision C and later.

5 to 40°C for NI PXI-1036 Revisions B and C and NI PXI-1036DC Revision B.

Содержание Two-Slot Embedded Controller NI PXI-8183






































































Результаты поиска

Содержание Two-Slot Embedded Controller NI PXI-8183

Отзывы:

Похожие инструкции для Two-Slot Embedded Controller NI PXI-8183

Бренды по названию

Популярные бренды

National Instruments Two-Slot Embedded Controller NI PXI-8183, Руководство пользователя

Результаты поиска

Содержание Two-Slot Embedded Controller NI PXI-8183

Отзывы:

Похожие инструкции для Two-Slot Embedded Controller NI PXI-8183

Бренды по названию

Популярные бренды