©
National Instruments Corporation
13
TBX-1316 High-Voltage Attenuator Terminal Block
Note
If your application cable diameter is smaller than what is listed above, replace the
supplied strain reliefs with the following strain reliefs or their equivalents. These strain
reliefs are not supplied with the TBX-1316.
Strain-relief cable diameter .................... 5 to 9 mm signals
(0.197 to 0.354 in.)
SKINTOP # S2213
2 to 6 mm PE ground
(0.079 to 0.236 in.)
SKINTOP # S2209
Strain reliefs available............................ 8 signals
1 PE ground
Field wire
Diameter.......................................... 6 to 20 AWG
Temperature rating.......................... 90 °C
Connector type ....................................... Screw terminal
Environmental
Operating temperature............................ 0 to 55 °C
Storage temperature ............................... –20 to 70 °C
Humidity ................................................ 10 to 90% RH, noncondensing
Maximum altitude .................................. 2,000 m
Pollution Degree
(indoor use only) .................................... 2
Safety
The TBX-1316 is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control,
and laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 61010-1
•
CAN/CSA-C22.2 No. 61010-1
Note
For UL and other safety certifications, refer to the product label, or visit
ni.com/certification
, search by model number or product line, and click the
appropriate link in the Certification column.