background image

14

|

ni.com

|

NI PXIe-4304/4305 and TB-4304 User Guide and Terminal Block Specifications 

3.

Pull the captive screws to unseat the module and slowly slide the module along the guides.

4.

Replace the filler panel in the empty slot.

5.

Store the module in an antistatic protective bag.

Figure 8.  

Removing NI PXIe-4304/4305 Modules

Create a Simulated Device

To run examples without the hardware installed, use an NI-DAQmx simulated device. To create 
a simulated device in MAX:
1.

Launch MAX.

2.

Right click 

Devices and Interfaces»Create New

.

3.

From the dialog, select 

Simulated NI-DAQmx Device or Modular Instrument

.

4.

Type 

4304

 or 

4305

 in the text box at the top of the window.

5.

Select the device from the list provided.

6.

Click 

OK

.

More Information

After you install NI-DAQmx, the NI-DAQmx documentation is available from 

Start»All 

Programs»National Instruments»NI-DAQmx

. Additional resources are online at 

ni.com/gettingstarted

.

1

Captive Screws (Use to remove modules.)

2

Front Panel (Do not use to remove modules.)

NI P

XIe-

10

62Q

CO

OLING

 CL

EARA

NC

E A

ND 

FAN 

FILTE

R M

AINT

ENA

NC

E RE

QUI

RE

D. 

S

EE MA

NUA

L.

2

1

Содержание TB-4304





















Отзывы: