background image

NI PXIe-4304/4305 and TB-4304 User Guide and Terminal Block Specifications

|

© National Instruments

|

11

3.

Click 

Start

 to test device functions, or 

Help

 for operating instructions.

To troubleshoot errors, refer to the 

NI-DAQmx Help

, or go to 

ni.com/support

.

Take an NI-DAQmx Measurement

NI-DAQmx Channels and Tasks

Refer to the

 NI-DAQmx Help

 for complete information about channels and tasks.

Use the DAQ Assistant to configure virtual channels and tasks in MAX or in your application.

Configure a Task Using the DAQ Assistant in MAX

Complete the following steps to create a task using the DAQ Assistant in MAX:
1.

In MAX, right-click 

Data Neighborhood

 and select 

Create New

 to open the DAQ 

Assistant.

2.

Select 

NI-DAQmx Task

 and click 

Next

.

3.

Select 

Acquire Signals

.

4.

Select the analog input, and the measurement type, such as voltage.

5.

Select the physical channel(s) to use and click 

Next

.

6.

Name the task and click 

Finish

.

7.

Configure the individual channel settings. Each physical channel you assign to a task 
receives a virtual channel name. To modify the input range or other settings, select the 
channel. Click 

Details

 for physical channel information. Configure the timing and 

triggering for your task. Click 

Run

.

Содержание TB-4304





















Отзывы: