Chapter 3
Configuring and Testing
©
National Instruments Corporation
3-7
Verifying the Signal Using Channel Strings
Refer to AppendixChapter B,
Using SCXI Channel Strings with
Traditional NI-DAQ (Legacy) 7.0 or Later
, for information about
formatting channel strings.
Complete the following steps to use channel strings in verifying the signal:
1.
Click
+
next to
Devices and Interfaces
.
2.
Click
+
next to
Traditional NI-DAQ Devices
.
3.
Right-click the appropriate E Series DAQ device.
4.
Click
Test Panels
.
5.
Enter the channel string.
6.
Enter the input limits.
7.
Select the
Data Mode
.
8.
Select the
Y Scale Mode
.
Refer to the
LabVIEW Measurements Manual
for more information and for
proper formatting of channel strings for different uses.
