National Instruments SCXI-1194, Руководство по началу работы

Страница: 7 / 23

Table 2. Determining the NI SCXI Switch Installation Procedure (Continued)
Chassis Type NI Switch Controller Type Installation
Procedure
NI PXI-1010 or NI PXI-1050 PXI
4
in rightmost PXI slot 3
PXI not in rightmost PXI slot 2
PXI Express compatible
5
in any
slot
2
NI USB-135x 4
NI SCXI-1600 5
NI PXI-1011 or NI PXI-1052 PXI
6
in rightmost PXI slot 3
NI SCXI-1600 5
Note
The NI 4060 device can only control the
NI SCXI-1127/1128/1129/1160/1161/1163R/1190 switch modules configured
using Traditional NI-DAQ (Legacy).
Related Information
Refer to the NI Switches Help for more information about NI switch controllers and adapter
kits.
Installation Procedure 1
Install an NI SCXI switch module in an existing system.
Refer to the following figure and complete the following steps to install an NI SCXI switch
module in an existing system.
4
PXI refers to a PXI switch controller that is not PXI Express compatible.
5
PXI Express is a compatible switch controller.
6
PXI refers to a PXI switch controller that is not PXI Express compatible.
6 | NI Switches Getting Started Guide | ni.com