Index
©
National Instruments Corporation
I-3
signal connections, 3-1 to 3-6
front connector, 3-1 to 3-3
analog input signal connections,
3-2 to 3-3
auto-zero calibration switches, 3-3
cold junction sensors, 3-3
thermocouple input assignments
(figure), 3-2
rear signal connector, 3-4 to 3-6
digital I/O signal connections, 3-6
pin assignments (figure), 3-4
pin descriptions (table), 3-5
SLOT0SEL* signal (table), 3-5, 3-6
software programming choices, 1-2 to 1-3
National Instruments application
software, 1-2
NI-DAQ driver software, 1-3
software-related resources, B-2
specifications, A-1 to A-4
analog input
amplifier characteristics, A-1 to A-2
dynamic characteristics, A-2
input characteristics, A-1
transfer characteristics, A-1
digital signals, A-3
environment, A-4
filters, A-3
physical, A-3
power requirements, A-4
stability, A-3
stability specifications, A-3
T
technical support resources, B-1 to B-2
theory of operation, 4-1 to 4-3
analog bus switch, 4-3
analog circuitry, 4-2
analog input channels, 4-3
block diagram, 4-1
digital control circuitry, 4-2
rear signal connector, 4-2
SCXIbus connector and SCXIbus
interface, 4-2
troubleshooting the self-test verification,
2-6 to 2-7
U
unpacking SCXI-1122 module, 2-1
V
VirtualBench software, 1-2
W
Web support from National Instruments,
B-1 to B-2
online problem-solving and diagnostic
resources, B-1
software-related resources, B-2
Worldwide technical support, B-2