©
National Instruments Corporation
I-1
Index
A
analog bus switch, 4-3
analog circuitry, 4-2
analog input
channels, 4-3
signal connections, 3-2 to 3-3
specifications
amplifier characteristics, A-1 to A-2
dynamic characteristics, A-2
input characteristics, A-1
transfer characteristics, A-1
auto-detecting modules, 2-4
auto-zero calibration switches, 3-3
B
block diagram of SCXI-1112, 4-1
C
calibration, auto-zero, 3-3
cold junction sensors, 3-3
ComponentWorks software, 1-2
configuration, 2-2 to 2-7
auto-detecting modules, 2-4
manually adding modules, 2-4 to 2-5
procedure for, 2-5
removing modules from software, 2-8 to 2-9
running Measurement & Automation
Explorer, 2-3
self-test verification, 2-6
troubleshooting, 2-6 to 2-7
connectors. See front connector; rear signal
connector.
D
DAQD*/A signal (table), 3-5, 3-6
DGND signal (table), 3-5
diagnostic resources, online, B-1
digital control circuitry, 4-2
digital I/O signal connections, 3-6
digital signal specifications, A-3
documentation
conventions used in manual, vii-viii
National Instruments documentation, viii
E
environment specifications, A-4
F
filter specifications, A-3
front connector, 3-1 to 3-3
analog input signal connections, 3-2 to 3-3
auto-zero calibration switches, 3-3
cold junction sensors, 3-3
thermocouple input assignments
(figure), 3-2
functional overview. See theory of operation.
I
installation. See also configuration.
procedure for module installation, 2-1 to 2-2
removing SCXI-1112 from SCXI chassis,
2-7 to 2-8
unpacking SCXI-1122 module, 2-1