![background image](http://html1.mh-extra.com/html/national-instruments/sc-2345-carrier/sc-2345-carrier_user-manual_3630080008.webp)
©
National Instruments Corporation
1-1
SC-2345/2350 Carrier User Manual
1
Setting up the SC-2345/2350
Carrier
This document assumes you have already installed, configured, and tested
the SC carrier, SCC modules, and the DAQ device to which they are
connected. If you have not done so, follow the instructions in the
DAQ
Getting Started Guide
and
SCC Quick Start Guide
,
included with the
hardware, before continuing. The
SCC Quick Start Guide
and
DAQ Getting
Started Guide are also available at
ni.com/manuals
or accessible from
Start»Programs»National Instruments»NI-DAQ»Browse Device
Documentation
after you install the DAQ documentation browser.
About the SCC Hardware
The SC-2345/2350 carrier transfers signals to and from 68-pin E/M Series
data acquisition (DAQ) devices, referred to as the DAQ device in this
manual. When used with SCC Series modules and a shielded 68-pin cable,
the SC-2345/2350 carrier offers easy-to-use, rugged, low-noise signal
conditioning on a per-channel basis. The SC-2345/2350 carrier also has
42 screw terminals for direct connection to the DAQ device digital signals.
Some SC-2345 carrier enclosures are available with configurable
connectors to maximize I/O flexibility through the use of
panelettes
.
All SC-2345/2350 carriers are portable enclosures for laptop and desktop
applications.
Optional rack-mount and stack-mount accessories enable you to mount
the SC-2345/2350 carrier with configurable connectors to suit your
application. The rack-mount option is available for standard 19 in. racks.
SC-2345 Carrier
The SC-2345 carrier supports analog I/O and digital I/O SCC modules. The
SC-2345 is available in the following forms:
•
SC-2345 connector block—the SC-2345 connector block requires you
to pass input signal wires through a strain relief