![background image](http://html1.mh-extra.com/html/national-instruments/sc-2345-carrier/sc-2345-carrier_user-manual_3630080029.webp)
Chapter 2
Connecting Signals to the Terminal Block of the SC-2345/2350 Carrier
©
National Instruments Corporation
2-3
SC-2345/2350 Carrier User Manual
Figure 2-2.
Rack-Mount Option
Installing the Stack-Mount Kit
Refer to Figure 2-3 and complete the following steps to install the CA-1000
stack-mount kit on the SC-2345/2350 carrier with configurable connectors:
1.
Remove the rubber feet from all except the bottom enclosure.
2.
Attach the stack-mount brackets to both ends of the lower
enclosure with the 4-40
×
1/4 in. flathead screws from the
stack-mount kit.
3.
Place the upper enclosure on top of the lower enclosure.
4.
Attach the stack-mount brackets to both ends of both enclosures with
the 4-40
×
1/4 in. flathead screws from the stack-mount kit.
1
4-40
×
1/4 in. Screws
2
Rack-Mount Brackets
2
2
1
1