![background image](http://html1.mh-extra.com/html/national-instruments/sc-2345-carrier/sc-2345-carrier_user-manual_3630080027.webp)
©
National Instruments Corporation
2-1
SC-2345/2350 Carrier User Manual
2
Connecting Signals to the
Terminal Block of the
SC-2345/2350 Carrier
The SC-2345/2350 carrier has a 42-position, triple-row screw-terminal
block for connecting to E/M Series DAQ device digital signals. The
SC-2345 Quick Reference Label identifies the location of each signal on
the terminal rows A to C. The terminal label numbers correspond to the pin
number location of each signal on the 68-pin E/M Series connector. Refer
to the
E Series Help
or
M Series Help
for more information about this
connector. The
E Series Help
and the
M Series Help
are available for
download at
ni.com/manuals
or accessible from
Start»Programs»
National Instruments»NI-DAQ»Browse Device Documentation
after
you install the DAQ documentation browser.
Figure 2-1 shows the locations of the digital signals on the SC-2345 and
SC-2350 terminal block when using an E Series or M Series connector 0.
Refer to the
M Series Help
, for specific pinout descriptions for M Series
devices when using connector 1.