About the SA1000X
This guide describes how to use the SA1000X active probe and contains
specifications and safety, environmental, and regulatory information.
Read this document for information about installation, configuration, and operation
of this equipment before you install, configure, operate, or maintain this product.
Users are required to familiarize themselves with installation and wiring instructions
in addition to requirements of all applicable codes, laws, and standards.
Figure 1. SA1000X
10:1
1.5 GHz
1 M
Ω
// 0.9 pF
for
50
Ω Input
20 V
max.
Made in Germany
SA 1500X
Caution
Observe all instructions and cautions in the user documentation.
Using the model in a manner not specified can damage the model and
compromise the built-in safety protection. Return damaged models to NI
for repair.
Attention
Suivez toutes les instructions et respectez toutes les mises
en garde de la documentation utilisateur. L'utilisation d'un modèle de
toute autre façon que celle spécifiée risque de l'endommager et de
compromettre la protection de sécurité intégrée. Renvoyez les modèles
endommagés à NI pour réparation.
Icons
Notice
Take precautions to avoid data loss, loss of signal integrity, degradation of
performance, or damage to the model.
© National Instruments
3
SA1000X Safety, Environmental, and Regulatory Information
